Panasonic WJ-HD500A Operating Instructions Manual page 87

• Set to ALM-MULTI
• Records alarm images and creates thumbnails of images that have most recently received an alarm.
• Records alarm images that is chosen detecting the rest of alarm duration every alarm inputs.
• Records alarm images according to the REC RATE(BASE) in evenly until reaches REC RATE(MAX). Then the
sum exceeds the maximum recording rate, it records images at maximum rate.
Start
C1 C2
T
Alarm Recording for Internal Timer Modes
As described before, there are three recording modes for Timer Recording: Time Lapse, Multi Shot and One Shot Recording.
Two of these, Multi Shot and One Shot recording, are event-recording functions reacting to an alarm input. Therefore, there is
no difference compared to an alarm recording.
The procedure described below is an example for alarm recording in the Time Lapse Recording mode.
• Time Lapse Recording
When the Time Lapse Recording mode is selected for Timer recording, it records the alarm-activated images in this mode
with the specified recording rate, image quality and duration, as shown below.
The recording pattern varies according to the setting of the Dynamic Recording parameter (DYNAMIC REC).
(If the camera inputs 2, 4 and 5 are assigned to a group.)
• Set to OFF
Records the group input images in sequence starting with the lower number of the video input.
Start
C2
• Set to ALM-PRI
Records the alarm-activated input images preferentially over other video inputs.
Start
C2
T
• Set to ALM-ONLY
Records the particular images that have activated the alarm.
Start
C2
90
Alarm 4 in
----- C16 C4
T
Thumbnail
C4 C5 C2
T
Thumbnail
C4 C5 C2
Thumbnail
C4 C5 C2
T
Thumbnail
Alarm 15 in
C4 C4 C15 C4
C4
T
Thumbnail
Alarm 4 duration
Alarm 2 in
C2 C4 C5 C2
T
Thumbnail
Alarm 4 in
C4 C2 C4 C4 C4
T
Thumbnail
Alarm 2 in
C2 C2 C2 C2
T
Thumbnail
Alarm 3 in
C15 C4 C15 C4 C15 C3 C15 C3 C15
T
Thumbnail
Alarm 15 duration
C4 C5 C2 C4 C5
Alarm 5 in
C5 C2 C4 C4 C5
T
Thumbnail
Alarm 5 in
C2 C5 C5 C5 C5
T
Thumbnail
Thumbnail
C5
C4 C2