About The Error Log - Panasonic WJ-HD716K Installation Manual

About the error log

The following are the descriptions about the contents of the error log and the network log.
• "x" indicates the extension unit number.
• "y" indicates the HDD unit number.
Content
Outage detection
Recover from a power out-
age
Alteration detection
No response from an
address of Panasonic
alarm protocol
Failed to resolve a address
of Panasonic alarm proto-
col from DNS
Other error for an address
of Panasonic alarm proto-
col
Parameter initialization
error
FAN warning
Thermal error warning
Reboot by the system
error
HDD remove error (proper-
ly recognized HDD was
removed without opera-
tions on the front panel)
HDD write error
HDD read error
140
Error log
POWER LOSS
POWER RECOVERED
ALTERED **CH
PANASONIC_ALM_RES_ERR
PANASONIC_ALM_ADD_ERR
PANASONIC_ALM_OTHER_
ERR
–
Recorder: MAIN FANy ERROR
Extension unit: EXTx FANy
ERROR
Recorder: MAIN THERMAL
ERROR
Extension unit: EXTx THERMAL
ERROR
SYSTEM REBOOT
Recorder: MAIN-y SWAP
WARNING
Extension unit: EXTx-y SWAP
WARNING
• Per HDD (In the single mode)
Recorder: MAIN-y WRITE
ERROR
Extension unit: EXTx-y WRITE
ERROR
• P er unit (in the RAID 5 or
RAID 6 mode)
Recorder: MAIN WRITE ERROR
Extension unit: EXTx WRITE
ERROR
• Per HDD (In the single mode)
Recorder: MAIN-y READ
ERROR
Extension unit: EXTx-y READ
ERROR
• P er unit (in the RAID 5 or
RAID 6 mode)
Recorder: MAIN READ ERROR
Extension unit: EXTx READ
ERROR
Network Log Display on
Monitor 2
– POWER
– –
– ALT–*
(*: camera ch)
– –
– –
– –
– –
– FAN
– THERMAL
– –
– SWAP_ERR
– –
– –
Output from the
connector at
the rear panel
Error + Outage
processing end*
–
Error
–
–
–
–
Error
Error
–
HDD error
–
–