Fronius Ohmpilot Operating Instructions Manual page 129

After a power failure,
the Ohmpilot will no
longer work
HE=heating element TS=temperature sensor WR=inverter ES=external source (e.g. gas-fired hea-
ting)
After a power failure, if it does not re-
ceive an IP address after 40 seconds,
the Ohmpilot automatically assigns a
fixed IP address to 169.254.0.180 (on-
ly valid if the Ohmpilot is connected to
the router via WLAN).
Restart Ohmpilot so
that the WLAN connec-
tion is re-established.
129