Panasonic Panafax UF-585 User Manual page 165

Deferred transmission
Direct Dialing
Directory Search Dialing
Directory Sheet
DTMF (Dual Tone Multi-
Frequency)
ECM (Error Correction Mode) The ability to correct transmission errors as detected during the
Energy-Saver Mode
End receiving station
FAX Forward
FAX Parameter List
FAX/TEL Auto Switching
F.C.C.
File
Fixed print reduction
FUNCTION
G3 mode (Group 3)
Group dialing
HALFTONE
Handshaking
Header
The ability to send documents to other stations at a later time.
The method of dialing where you enter the entire telephone number
through the keypad.
Allows you to dial a full telephone number by searching the station's name
entered in the One-Touch keys or Abbreviated dialing numbers.
The list that contains the station names that are programmed into your unit.
Dialing method that sends a different set of frequencies for each digit of the
telephone keypad. Commonly refers to touch tone dialing.
transmitting phone call.
Saves energy by consuming less power than when in standby mode by
turning off the fuser unit after the specified time.
In a relay network, the final station designated to receive the document.
The ability to forward all incoming faxes to the registered station in the
specified ABBR No.
The list that contains the home FAX parameters settings that you have
programmed into your machine.
The ability to share a single telephone line for both fax and voice usage.
Federal Communications Commission. The U.S. Government organization
that regulates communications originating or terminating in the United
States.
A task that has been stored into the memory of your unit. Examples are
deferred transactions.
The method that allows you to determine one reduction rate, such as 75%,
for all incoming documents.
The control panel key that will be utilized to begin an operation or
configuration of a feature.
Refers to the standards and transmission capabilities of the current
generation of facsimile machines.
The ability to program many telephone numbers into a single station so
that many locations can be dialed in sequence utilizing a single keystroke.
A scanning technique to distinguish levels of gray from black and white.
Your machine can detect up to 64 levels of gray in halftone mode.
The exchange of a group of control signals that communicate between the
transmitter and receiver. These signals determine the condition at which
communication can occur.
A row of information that is transmitted by the sending machine and printed
on the top of each page by the receiving unit. This identifies the
transmitting unit and information about the transmission, such as time and
date.
Glossary
9
163