Panasonic Panafax UF-585 User Manual page 144

Troubleshooting
Info.
Code
540/541 Communication error occurred while transmitting.
542
543/544
550 Telephone line disconnected.
552/553 Communication error occurred while receiving.
554/555
580 Sub-address transmission to a unit that has no Sub-
address function.
581 Sub-address Password transmission to a unit that has
no Password Sub-address function.
601 ADF Door was opened during ADF transmission.
623 No document loaded on the ADF.
630 Redial was not successful due to a busy line.
631 During dialing, STOP was pressed.
634 Redial was not successful due to no response from the
called station, wrong number dialed or busy tone was
not detected.
Note: If busy tone is not detected, the machine will
only redial once.
638 Power failure occurred during the communication.
800 - 816 Parameter setting for Confidential Network or Relay
825 communication is not properly set.
870 Memory overflow occurred while storing documents
into memory for transmission.
(see Note 1)
Note:
1. After identifying the problem and verifying the recommended action, if the information Codes keep reoccuring or for
help on Information Codes that appear on your machine but are not listed above, please contact your local
Panasonic Authorized Dealer.
142
Meaning Action
1. Reload the document and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Check the remote station.
Close the ADF Door and send again.
Reload the document and send again.
Reload the document and send again.
Reload the document and send again.
Check the telephone number and send again.
Check the power cord and plug.
Verify your Confidential Network and Relay
communication parameter settings.
1. Transmit documents without storing into
memory.
2. Install Optional Memory Card.
Page
--
--
--
122
122
144
--
--
--
--
22
112
53
155