Calibrating Automatically; Calibrating Manually - Epson EB-770Fi User Manual

• Moving the projector
Note: Move any pen you are not using away from the projection screen while calibrating.

Calibrating Automatically

Calibrating Manually

Parent topic:
Calibrating Automatically
You do not need the pens or a computer for Auto Calibration.
1. Press the Menu button, select the Pen/Touch menu, and press
2. Select Auto Calibration and press
This screen appears:
3. Adjust the image focus, if necessary.
4. Check that the image pattern fits into the projected display, then press
A pattern appears then disappears, and the system is calibrated. If you see a message that
calibration failed, you need to calibrate manually.
The cursor location and pen position should match after calibration. If not, you may need to calibrate
manually.
Parent topic:
Calibrating Manually
If the cursor location and pen position do not match after auto calibration, you can calibrate manually.
Using the Interactive Pens
Pen Calibration
Enter.
211
Enter.
Enter to select Yes.