1. Press the E-Zoom + button on the remote control.
You see a crosshair on the screen indicating the center of the zoom area.
2. Use the following buttons on the remote control to adjust the zoomed image:
• Use the arrow buttons to position the crosshair in the image area you want to zoom into.
• Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary.
• To pan around the zoomed image area, use the arrow buttons.
• To zoom out of the image, press the E-Zoom – button as necessary.
• To return to the original image size, press the Esc button.
Parent topic:
Using Multiple Projectors
You can combine the projected images from two projectors to create one large image.
Note: Before projecting, make sure you set Color Mode to Multi-Projection in each projector's Image
menu (EB-770Fi).
For best results, wait at least 30 minutes after you start projecting, then select settings and make
adjustments in this order:
• Set the projector ID
• Adjust Color Uniformity
• Set Light Source Mode to Custom and adjust the Brightness Level in the projector's Operation
menu (EB-760Wi)
• Blend the image edges (EB-770Fi)
• Match the image colors (EB-770Fi)
Adjusting Projector Features
155