Changing The Projection Mode Using The Remote Control - Epson EB-770Fi User Manual

• Front/Upside Down flips the image over top-to-bottom to project upside-down from a wall or ceiling
mount.
• Rear flips the image horizontally to project from behind a translucent screen.
• Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or
ceiling and behind a translucent screen.
Note: The two Rear projection modes cannot be used with the interactive features.
You can change the projection mode using the remote control or by changing the Projection setting in
the Installation menu.

Changing the Projection Mode Using the Remote Control

Changing the Projection Mode Using the Menus
Parent topic:
Changing the Projection Mode Using the Remote Control
You can change the projection mode to flip the image over top-to-bottom.
1. Turn on the projector and display an image.
2. Hold down the button on the remote control for 5 to 10 seconds.
The image disappears briefly and reappears flipped top-to-bottom.
3. To change projection back to the original mode, hold down the A/V Mute button for 5 to 10 seconds
again.
Parent topic:
Using Basic Projector Features
Projection Modes
128