You see the toolbar on the bottom of the projected image.
2. To move the toolbar to the right, left, top, or bottom of the screen, use the pen or your finger to drag it
to the desired location.
3. To switch to one of the other interactive modes, do one of the following:
• To split the screen with whiteboard mode, select the
• To switch to PC Interactive mode, switch to the input source for the connected computer or select
the
computer is already connected.
4. To show or hide the toolbar, select the
Note: You can also show or hide the projector control toolbar by setting the Interactive > Display
Toolbars setting to Always Show or Hide for Set Time.
Parent topic:
Controlling Computer Features from a Projected Screen (PC Interactive Mode)
You can navigate, select, and interact with your computer programs from the projected screen using the
interactive pens or your finger just as you would a mouse.
PC Interactivity icon on the toolbar and make sure it is set to On if the
Interactive Modes
Whiteboard icon on the toolbar.
icon.
205