Table of Contents
Advertisement
Configuration
3. Double-click on each monitor ID that you wish to add to this target record
As you double-click on a monitor ID number's corresponding box, the representative box
will turn green, indicating that it is now part of this record.
First row = monitor IDs 0-9, second row = monitor IDs 10-19, etc.
Besides choosing which monitors will be part of a specific target ID, you must also
choose either Hold or Sequence from the Display Mode section of this window to define
the display mode for the entire target record.
When more than one monitor is selected, alarm actions are distributed across those
monitors.
When "Hold" is chosen, the alarm action with the highest priority for each monitor is
displayed, and remains until it is acknowledged. Once acknowledged, the next queued
action with next-highest priority is then displayed – again until acknowledged. When
"Sequence" is chosen, the alarm actions for each monitor are displayed in sequence
without requiring acknowledgement.
You will also select the first and last Output Port for the entire target record. The First
port indicates which port will be triggered when there is an alarm action to the target
monitor. The Last port indicates which port will be triggered when the alarm actions are
removed from the target monitor.
43
Advertisement
Table of Contents
