Digital Output - Panasonic WJ-MPU955 User Manual

Admin console
Hide thumbs Also See for WJ-MPU955:
Table of Contents

Advertisement

Digital Output

D I G I T A L O U T P U T
F i e l d D a t a
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a
system domain. Its format is shown as below:
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved]
Default Setting: 0x0F000XXX
XXX is the value registered in Address[SW1] of the previous page .
Note: See MPEG2 Encoder and MPEG2 Decoder Operating Instructions.
Sub Device ID Description: GX sub device identifier is a local physical number that is uniquely identified
within the device. It also refers as a channel.
Validation: Only 0
Default Setting: Automatically assigned to 0.
Bank Description: Specifies a local control port for the device.
Validation: decimal format, 1 - 1024
Default Setting: Automatically assigned.
Note: This port number is the same as the port number of the ALARM I/O PORTS page, and it is
necessary to associate it.
Comment Description: A string to put comment notes.
Validation: Within 16 characters.
Default Setting: (None)
RS485 Data Port
R S 4 8 5 D A T A P O R T
F i e l d D a t a
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a
system domain. Its format is shown as below:
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved]
Default Setting: 0x0F000XXX
XXX is the value registered in Address[SW1] of the previous page .
Note: See MPEG2 Encoder and MPEG2 Decoder Operating Instructions.
Sub Device ID Description: GX sub device identifier is a local physical number that is uniquely identified
within the device. It also refers as a channel.
Validation: Only 0
Default Setting: Automatically assigned to 0.
Baud Rate Description: Specifies serial communication baud rate.
Validation: 0B = 2400 bps, 0D = 9600 bps, 0E = 19200 bps, 0F = 38400 bps
Default Setting: 0D
Appendix A
_ _ _ _ _ X X X
device id (by rotary SW of an encoder front panel)
X X X X X _ _ _
device type
_ _ _ _ _ X X X
device id (by rotary SW of an encoder front panel)
X X X X X _ _ _
device type
134

Advertisement

Table of Contents
loading

Table of Contents