Table of Contents
Advertisement
VIDEO LOSS LOG
DATE: YYYY MMM DD format
DAY: Day of the week
TIME: AM or PM (12 hour format)
LCAM: Logical camera number that is connected to the video input port
STATE: Video loss state:
OK:
LS:
VL:
HL:
TYPE: Indicates where a camera connects:
S:
C:
SWITCHING LOG (not currently supported)
DATE: YYYY MMM DD format
DAY: Day of the week
TIME: HH:MM:SS AM or PM (12 hour format)
DEVID: Specifies the device or operator type and ID. The ID number is prefixed with
four letters, each representing a device or operator type. K = user / operator; S = super
user; SEQ = sequence; and ALM = alarm.
MON: Indicates logical monitor number comprised of area (max 3 digits) and local
(right-most 4 digits)
SOURCE: Indicates logical camera number.
ACTION: Task performed by the specified operator using the displayed components
and devices (seize, release, or suspend).
3. Select from the drop-down box 01A or 01B in the CPU section
4. Click the Explore CPU button
Configuration
above threshold and in sync
video signal below its threshold and in sync
video signal below its threshold and no sync
above threshold and no sync
MXSW input
MXCONT input
117
Advertisement
Table of Contents
