Table of Contents
Advertisement
Resetting the Main CPU
After replacing the system file in the main CPU, each CPU needs to be rebooted so that
the updated information is read and executed correctly (See Replacing the System File
in the Main CPU on page 30).
1. Select the CPU command from the Domain menu, and select the Reset tab
2. Select the CPU you wish to reset from the drop-down box
3. Click the red Reset button to reset the selected CPU
4. Verify that you wish to reset the selected CPU by clicking Yes on the
Confirm Reset window that appears
If a backup CPU is in place, you will be asked to reset that CPU as well. Reset
that CPU as well, so that both CPUs are using the update system file.
Configuration
35
Advertisement
Table of Contents
