Table of Contents
Advertisement
Ask your installer or network administrator for the IP address for the Main A CPU. This
will let the MPU955 Admin Console software know where to send the configuration
database later.
2. If your system is equipped with a redundant CPU, then select the Redundant
check box and enter the IP address for the Main B CPU
Ask your installer or network administrator for the IP address for the Main B CPU. If the
system has just a single CPU, leave the redundant check box blank. The Main B CPU IP
address will not be required.
3. Enter a Unit Name for the system unit
It is best if the name is practical, and easy to understand by anyone using the system.
4. Decide on the operational mode for the NSS CPU by choosing the size of your
system from the Size drop-down menu
The Size Configuration section of this window is where you will see the details on the
size the CPU you select. As you choose Standard, Enhanced, or High-Speed, from the
Size drop-down menu, the maximum capacities of each size will display. The maximum
capacity is the largest supported number of each of the components listed. You must
match the main CPU (MCPU) capacity with the capacity in this window.
Configuration
11
Advertisement
Table of Contents
