Table of Contents
Advertisement
Quick Links
Symaro™
Wireless room sensor
QAA2890/WI, QFA2890/WI, QPA2892/WI
A6V12871702_en--_a
2023-03-14
Wireless room sensor
●
Wireless communication KNX IoT over Thread
●
Battery-powered:
QAA2890/WI, QFA2890/WI: 3 x alkaline batteries type AAA, 1.5 V
QPA2892/WI: 2 x alkaline batteries type AA, 1.5 V
●
Temperature accuracy: ±0.3 K@21...25 °C, ±0.7 K@15...21 °C/25...35 °C,
±1 K@0...15 °C/35...50 °C
●
Relative humidity accuracy: ±2 % r.h.@30...70 % r.h.,
±5 % r.h.@0...30 % r.h./70...100 % r.h.
●
CO
accuracy: ±50 ppm / ±2 % m.v. @0...2000 ppm
2
●
Automatic baseline calibration (ABC) for CO
measurement
2
Smart Infrastructure
Advertisement
Table of Contents
Related Manuals for Siemens Symaro QAA2890/WI
Summary of Contents for Siemens Symaro QAA2890/WI
- Page 1 Symaro™ Wireless room sensor QAA2890/WI, QFA2890/WI, QPA2892/WI Wireless room sensor ● Wireless communication KNX IoT over Thread ● Battery-powered: QAA2890/WI, QFA2890/WI: 3 x alkaline batteries type AAA, 1.5 V QPA2892/WI: 2 x alkaline batteries type AA, 1.5 V ● Temperature accuracy: ±0.3 K@21…25 °C, ±0.7 K@15…21 °C/25…35 °C, ±1 K@0…15 °C/35…50 °C ●...
- Page 2 Wireless room sensors are designed for wall mounting, flush mounting and tape mounting. They are suitable for use with most commercially available recessed conduit boxes. The device has 2 parts: ● Plastic housing with electronic components ● Mounting plate Siemens A6V12871702_en--_a Smart Infrastructure 2023-03-14...
-
Page 3: Type Summary
Type of units Product number SSN NO. KNX IoT to BACnet gateway OCT200.KNBA S55812-Y102 Thread mesh extender OCT100.R S55812-Y101 All documents can be downloaded from http://siemens.com/bt/download. Product documentation Title Document ID Mounting instruction A6V12816395 Operation manual A6V12905642 CE declarations A5W00277721A... - Page 4 A5W00277723A Environmental product declaration A5W00279084A Related documents such as the environmental declarations, CE declarations, etc., can be downloaded from the following Internet address: www.siemens.com/bt/download Notes Safety CAUTION National safety regulations Failure to comply with national safety regulations may result in personal injury and property damage.
- Page 5 Chemical vapors at high concentration in combination with long exposure times may distort the sensor reading. NOTICE Avoid direct contact with chemicals in any form. Do not touch sensitive components with bare hands or tools as this will negatively impact measurement accuracy. Siemens A6V12871702_en--_a Smart Infrastructure 2023-03-14...
-
Page 6: Maintenance
The batteries are almost empty if LED is red and keeps fast flashing (100 ms on / 100 ms off) for 8 s and must be replaced within 2 weeks. For optimal performance, we recommend using high performance alkaline batteries. Communication between sensor and gateway becomes unstable when battery power is low. Note Siemens A6V12871702_en--_a Smart Infrastructure 2023-03-14... -
Page 7: Regulatory Compliance Information
1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation FCC Caution: Changes or modifications not expressly approved by Siemens Switzerland Ltd. could void user authority to operate the equipment. United States representative https://new.siemens.com/us/en/products/buildingtechnologies/home.html IC Statement This device complies with Industry Canada license-exempt RSS standard(s). -
Page 8: Warranty
Ce transmetteur ne doit pas être placé au même endroit ou utilisé simultanément avec un autre transmetteur ou antenne. United Kingdom conformity assessed Contact for regulatory topics: (GB) Siemens plc, Sir William Siemens House, Princess Road, Manchester, M20 2UR Radio equipment directive... - Page 9 ● Max. 50 m ● Sensor and extender ● Max. 50 m * Results are tested in Siemens testing environment. The actual range depends on building structure and environment. Functional data of sensor Humidity sensor Measuring range 0…100 % r.h.
- Page 10 EN 301489-1 EN 301489-17 EN IEC 62311 EN 300328 For use in residential, commerce, light- Electromagnetic compatibility (Applications) industrial and industrial environments EU conformity (CE) A5W00277721A * RCM conformity A5W00277724A * UKCA conformity A5W00277723A * Siemens A6V12871702_en--_a Smart Infrastructure 2023-03-14...
- Page 11 Sensor (complete assembly) Silicone Packaging Corrugated cardboard Weight including package QAA2890/WI Approx. 204.6 g QFA2890/WI Approx. 204.6 g QPA2892/WI Approx. 228.3 g The documents can be downloaded from http://siemens.com/bt/download. Dimensions Dimensions in mm Type QAA2890/WI, QFA2890/WI QPA2892/WI Siemens A6V12871702_en--_a Smart Infrastructure 2023-03-14...
- Page 12 Issued by © Siemens Switzerland Ltd, 2023 Siemens Switzerland Ltd Technical specifications and availability subject to change without notice. Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug +41 58 724 2424 www.siemens.com/buildingtechnologies Document ID A6V12871702_en--_a Edition 2023-03-14...