Siemens QAM2020.045 Technical Instructions

1000 Ω Nickel RTD
Sensors
QAM2020.045, QAM2020.020 and
QAM2020.010
Duct Point Sensor
QAA24U Room Sensor
Application
Product Numbers
QAE2020.005 Immersion Sensor
QAA25U Room Sensor with
Remote Setpoint Adjustment
The 1000 ohm Nickel temperature sensors are used in HVAC installations to measure
room, outside air, duct or liquid temperature. They can also be used to provide
changeover from heating to cooling, or vice versa.
They are designed for integration in terminal units such as fan coil or induction units.
The sensors can be installed either by the terminal unit manufacturer or on site.
Product Number
QAM2020.045 Duct point sensor, 18-inch
QAM2020.020 Duct point sensor, 8-inch
QAM2020.010 Duct point sensor, 4-inch
QAE2020.005 Immersion sensor
QAC2020U Outside air sensor
QAA24U Room sensor
QAA25U Room sensor with remote setpoint adjustment
QAP22 Cable temperature sensor
Technical Instructions
Document No. 155-330P25
September 5, 2008
QAC2020U Outside Air Sensor
QAP22 Cable Temperature Sensor
Table 1.
Description
Siemens Industry, Inc.