Maintenance After Each Use - Daewoo DCS2512 User Manual

WARNING
Be alert to the springing back of a cut limb.
Pruning of Standing Tree
Cut up from the bottom, finish down from the top.
WARNING
• Do not use an unstable foothold or ladder.
• Do not overreach.
• Do not cut above shoulder height.
• Always use both your hands to hold the saw.
7. MAINTENANCE
WARNING
Before cleaning, the inspecting or repairing the unit, make sure that engine has stopped and is cool.
Disconnect the spark plug to prevent accidental starting.

MAINTENANCE AFTER EACH USE

1. Air filter
Loosen the knob and remove the air cleaner cover. Take off the
filter elements and tap off attached sawdust. When they are
extremely dirty, shakewash with gasoline.
Dry them completely before reinstalling.
2. Oiling port
Dismount the guide bar and check the oiling port for clogging.
3. Guide bar
When the guide bar is dismounted, remove saw
dust in the bar groove and the oiling port.
<Type : sprocket nose>
Grease the nose sprocket from the feeding
port on the tip of the bar.
4. Others
Check for fuel leakage and loose fastenings and damage to major parts, especially handle joints
and guide bar mounting. If any defects are found, make sure to have them repaired before operating
the saw again.
17