Installing Guide Bar And Saw Chain - Daewoo DCS2512 User Manual

Shows the directions that the chain brake is released (white arrow) and
activated (black arrow).
Position: Front of the chain cover
If you turn the rod by screwdriver follow the arrow to the "MAX" position,
the chain oil flow more, and if you turn to the "MIN" position, less.
Position: Bottom of the power unit.

3. INSTALLING GUIDE BAR AND SAW CHAIN

A standard saw unit package contains the items as illustrated.
Open the box and install the guide bar and the saw chain on the power unit as follows:
WARNING
The saw chain has very sharp edges. Use thick protective gloves for safety.
1. Pull the guard towards the front handle to check that the chain
brake is not engaged.
2. Loosen the nuts and remove the chain cover.
3. Fix the hanger on the rear of power unit by screw.
4. Mount the guide bar then fit the saw chain around
the bar and sprocket.
NOTE
Pay attention to the correct direction of the saw chain.
Moving direction
5. Fit the chain tensioner nut into the lower hole of the guide bar,
then install the chain cover, and fasten the mounting nut to finger tightness.
9