Network Stack Configuration - Avalue Technology ARC-1538-B Quick Reference Manual

Item
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices

3.6.2.11 Network Stack Configuration

Item
Network Stack
Options
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Auto[Default]
Floppy
Forced FDD
Hard Disk
CD-ROM
Options
Enabled
Disabled[Default]
ARC-1538 Quick Reference Guide 55
Quick Reference Guide
Description
The time-out value for Control, Bulk, and
Interrupt transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it
properly reports itself to the Host Controller.
'Auto' uses default value: for a Root port it is
100ms, for a Hub port the delay is taken form
Hub descriptor.
Mass storage device emulation type. 'AUTO'
enumerates devices according to their media
format. Optical drives are emulated as
'CDROM', drives with no media will be
emulated according to a drive type.
Description
Enable/Disable UEFI Network Stack.