Veco Climma Compact 5 Installation Manual Use & Schematics page 18

CONDITIONING PLANTS
4.3 - CONTROL PANEL ( SCHEMATIC 302 )
The control panel has a 3 m long connection cable with one plug, which has nine pins. The plug must be
plugged in the corresponding socket with due caution and carefully. Make sure to fasten the cable with the
supplied clamp on the electrical box side.
B
MODE
L
B
4.4 - SEA WATER PUMP
The pump should be connected to the "PUMP" marked terminal (schematics C301 and C303). The connec-
tion must be done with three wires cables (phase, neutral and ground) of adequate section (minimum 1.5 - 2
mm) according to the installed pump power and distance. The connection box can control directly pumps up
to 0,5 Kw both 220 V.
page 17
SPLIT and COMPACT models
4 ELECTRICAL CIRCUIT
F
B P1
L
FAN
TEMP
2 1
G
A
C
D
N
L
AMP PLUG
9 PINS
F 1
B 2
D 3
I 4
H 5
L 6
G 7
A 8
C 9
TO EL. BOX
www.climma.it