Table of Contents
Advertisement
6. Assembly instructions
The HEATFLOW S5 can only be assembled with a single wall pipe, refer to the Annex for double
wall pipe retrofit.
The HEATFLOW S5 cannot be assembled with a Heat shield (AC02762), lowered ceiling, inside
an alcove or in a mobile home.
THE HEATFLOW S5 CANNOT BE INSTALLED IN REDUCED CLEARANCES
1. Remove the air baffle
(BB) by removing the 4
screws (AA) at the
back of stove.
Installation Instruction HEATFLOW S5
Wear protective gloves for the following instructions
WARNING
English
7
46310A
2023-03-15
Advertisement
Table of Contents
