14. Remove the pin (EE)
and latch mechanism
bearing (FF) from the
handle shaft.
15. Remove
the
handle shaft (GG) and
replace it with the one
provided (M) with the
accessory.
16. Put back the pin, its
bearing and the small
spring pin. Adjust the
door latch mechanism
by
screwing/unscrewing
the door handle with
some intensity.
17. Verify the door seal by
closing and locking it on
a bit of paper. If the
paper
slips
anywhere around the
door,
the
adjustment
must
reviewed or the seal
gasket
must
changed.
Installation Instruction HEATFLOW S5
former
easily
door
be
be
English
13
46310A
2023-03-15