Before Initial Use; Safety Instructions; Disposal Of The Device (Environment); Wall Mounting - Topcom FIDELITY 1000 User Manual

Topcom Fidelity 1000
1

Before Initial use

Thank you for purchasing this new desktop tele-
phone.
1.1 Intended Purpose
This product is intend to be connected indoor to
an analogue PSTN telephone line.
1.2 Connection
The CE symbol indicates that the unit
complies with the essential
requirements of the R&TTE directive.
This device has been designed and manufactured
to comply with the 98/482/EC rule, referent to
the Pan European connection of a terminal to
the Public Switching Telephone Network (PSTN)
and following the established guidelines by
the 1999/5/EC Directive about radio electric
equipment and the reciprocal acknowledge of
their conformity. However, due to the fact that
there are some differences in the PSTNs from one
country to another, the verifying measurements
by themselves do not set up an unconditional
guarantee for an optimal working in every connec-
tion point to the PSTN of any country.If any prob-
lem comes up, get in touch firstly with the
distributor.
In any case, use conditions for which the product
has been created should be respected as well as
avoid its use in public or private networks with
technical requirements clearly different to those
established in the EU.
2

Safety instructions

Please read carefully through
the following information concerning
safety and proper use. Make yourself
familiar with all the functions of
the equipment. Be careful to keep these
advice notes and if necessary pass them
on to a third party.
4
• Do not place the basic unit in a damp room or
at a distance of less than 1.5 m away from
a water source. Keep water away from
the telephone.
• Do not use the telephone in environments
where there is a risk of explosions.
• Dispose of the batteries and maintain
the telephone in an environment-friendly
manner.
3 Cleaning
Clean the telephone with a slightly damp cloth or
with an anti-static cloth. Never use cleaning
agents or abrasive solvents.
4 Disposal of the device
(environment)
At the end of the product lifecycle,
you should not throw this product
into the normal household garbage
but bring the product to a collection
point for the recycling of electrical
and electronic equipments.
The symbol on the product, user guide and/or box
indicate this.
Some of the product materials can be re-used if
you bring them to a recycling point. By re-using
some parts or raw materials from used products
you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you
need more information on the collection points in
your area.
5

Wall mounting

Pull out and rotate the wall mounting hook (12).
Put it back in position.
Measure and mark the wall mounting locations
(17).
Drill holes, fit wall plugs and screw in screws.
The cable of the telephone can be fixed in the slot
(19) on the backside of the phone depending on
the telephone connection position.
Mount the telephone on the screws.
Topcom Fidelity 1000