System Shutdown - DW VMAX IP G4 -VG494P User Manual

7

System Shutdown

1.3
To shutdown the NVR, click the exit button [
click [SHUTDOWN] in the pop-up screen as shown below. To avoid potential electical damage, do not
disconnect power to the NVR by disconnecting the power plug from the NVR while in operation.
When prompting a SHUTDOWN, input the administrator password and click [OK] to shut down the
system. Click [YES] to confirm shutdown.
Note Users can input passwords by using a mouse and the virtual keyboard.
] on the Toolbar at the bottom of the screen then
VMAX IP G4™
®