Table of Contents
Advertisement
13
HDD FULL
Select "Overwrite" or "Stop recording" when HDD is full.
•
Overwrite: NVR deletes the oldest data and records new data.
•
Stop recording: NVR stops recording.
HDD CHECK
Click (
) next to each HDD to view full information of each
HDD such as model name, serial no, capacity, bad sector ratio, lifetime
(used time) and temperature.
HDD FORMAT
Check the box next to the HDDs you wish to format and press the
"FORMAT" button. If system resources are currently occupied (such
as network connection) during the format process, the format process
may fail. It is recommended to reboot the system to release system
resources and then try to format again.
AUTO DELETE
Set the period when the HDD will automatically delete all recorded data. Select from None (default)
up to 366 days.
Note
1.
It may take a few minutes to format HDD.
2.
When the format is done, all data in the HDD will be deleted.
3.
The system always reserves some space in each built-in HDD to effectively utilize
archiving memory.
Network
2.4
Set up the NVR's network settings for remote connection.
NETWORK TYPE
Select either STATIC IP or DHCP for dynamic IP. For proper configuration, it is recommended to
assign the NVR a DHCP address and let the NVR auto-discover all the proper network settings, and
then change the Network Type to Static IP and save the changes.
•
DHCP: the NVR will automatically configure the network settings according to the current
VMAX
IP G4™
®
Advertisement
Table of Contents
Need help?
Do you have a question about the VMAX IP G4 DW-VG494P and is the answer not in the manual?