Table of Contents
Advertisement
VMAX
IP G4™
®
2.
Select the channel number to register.
3.
Select the protocol (ONVIF and RTSP) of the camera. Registration is available with one of the
following. – IP Address, RTSP URL, or ONVIF URL
4.
Input necessary information with the
stream information.
5.
Click the [APPLY] button to register the camera.
Deleting Cameras
3.3
To delete a camera, go to Advanced Configuration by clicking [ADVANCED] in Camera
Management (Menu > Record).
1.
Non-PoE Camera - Delete (
it from the NVR's channels.
2.
PoE Camera - PoE cameras cannot be deleted while connected to the NVR's PoE switch.
To delete a PoE camera, unplug the camera from the NVR and click the
is activated.
button and click the [GET STREAM] button to get
) button is always activated. Click
on the camera to delete
button when it
22
Advertisement
Table of Contents
Need help?
Do you have a question about the VMAX IP G4 DW-VG494P and is the answer not in the manual?