2.10 MicroSD Card Reader
The microSD card reader is located on the router's rear panel under a metal cover. This
card reader allows the router to operate with microSD memory cards. The technical speci-
fications are stated in the table below. The microSD card changing procedure is described
below.
Technical specifications of microSD card
Supported technologies
Supported capacity
Supported microSD card filesystems
Table 14: Technical Specifications of MicroSD Card
Inserting the microSD card:
• To remove an inserted microSD card, use the flat end of a spudger, or your finger-
nail, press the card slightly into its slot until you hear a click, release the card and it
will pop out of its slot.
• To insert a microSD card push card into the slot with correct orientation as shown
on the picture until it clicks into place.
SDHC
SDXC
Figure 17: MicroSD Card Insertion
22
ICR-4401
SD, SDHC, SDXC
up to 32 GB
from 32 GB to 512 GB
vfat, ext2, ext3, ext4