Microsd Card Reader; Microsd Card Insertion; Technical Specifications Of Microsd Card - Advantech ICR-4461 User Manual

5g industrial router

Hide thumbs Also See for ICR-4461:

Table of Contents

2.11 MicroSD Card Reader

The microSD card reader is located on the router's rear panel under a metal cover. This

card reader allows the router to operate with microSD memory cards. The technical speci-

fications are presented in the table below. The procedure for changing the microSD card is

described below.

Supported technologies

Supported capacity

Supported microSD card filesystems

Table 13: Technical Specifications of MicroSD Card

Inserting the microSD card:

• To remove an inserted microSD card, use the flat end of a spudger, or your finger-

nail, press the card slightly into its slot until you hear a click. Release the card, and

it will pop out of its slot.

• To insert a microSD card, push the card into the slot with the correct orientation as

shown in the picture until it clicks into place.

SDHC

SDXC

Figure 22: MicroSD Card Insertion

ICR-4461

SD, SDHC, SDXC

up to 32 GB

from 32 GB to 512 GB

vfat, ext2, ext3, ext4

Table of Contents