Checchi & Magli BABY COMPACT Use And Maintenance Manual page 56

Safety advice concerning adjustments
Maintenance and adjustment work must be car-
ried out with the work vehicle on flat and compact
ground, with the tractor engine off, parking brake
Adjusting the spacing between the packing wheels and the ploughshare
The distance between the packing wheels and the
ploughshare must be adjusted according to the type of
ground.
Proceed as outlined below.
1) Loosen the screws (A).
2) Move the packing wheel unit (B) as required.
3) After adjustment, tighten the screws (A).
Adjusting the symmetry between the packing wheels and the ploughshare
Because of their incorrect position, the packing wheels
may rub against the share.
Proceed as outlined below.
1) Loosen screw (A) and screw (B).
2) Centre the packing wheels with the ploughshare.
3) Tighten the screws (A - B).
Adjusting the packing efficiency
B
UN41 0347AL
English language
ADJUSTMENT INFORMATION
B A
12
engaged, ignition key removed, and adopting all the
necessary safety measures required to work safely.
A
B
UN41 0346AL
B
A
UN41 0358AL
5
A
B
Use and maintenance