Nozzle Cleaning - Checchi & Magli WOLF PRO Use And Maintenance Manual

Safety advice for maintenance
During maintenance, take all the precautions re-
quired to work safely.
Wear suitable protective equipment for the type of
products to be handled.

Nozzle cleaning

CAUTION
Limit pressure to 2 bar and wear safety
glasses to protect the eyes.
Proceed as outlined below.
1) Clean the nozzle (A) with a jet of pres-
surised air.
2) Direct the jet from the inside of the
nozzle outwards.
Nut and bolt tightness check
Check that the main fixing nuts and bolts are tight.
Tighten any loose bolts to the correct tightening torque
(see the manual for the work vehicle onto which the tool
Safety advice in case of replacements
Adopt appropriate safety measures and use suitable
equipment to prevent accidents that could injure
the people in charge of the operations and people
nearby.
Disconnect the device from the source of electricity.
English language
MAINTENANCE INFORMATION
UN41-0937UA
INFORMAZIONI SULLA MOVIMENTAZIONE E INSTALLAZIONE INFORMATION CONCERNING REPLACEMENTS
For more information, see the user manual for the
machine onto which the device is fitted.
A
is fitted, in the bolt tightening torques table).
See also the guidelines on replacements contained in
the manual for the machine onto which the device is
fitted.
All component replacement work not described in
this chapter must be carried out at an authorised
service centre.
11
7
8
Use and maintenance