Table of Contents
Advertisement
Completing the
connection for
Windows NT 4.0
To print from Windows NT 4.0 you need to:
•
Set up network servers, if any.
•
Set up the KX-P8420 to accept print jobs from your computer.
•
Configure a port on each computer with Windows NT 4.0 for the network
or connection type.
Setting up parallel printing on Windows NT 4.0
Once you have installed the PostScript printer driver for Windows NT 4.0
complete the setup for parallel printing as follows:
To set up parallel printing:
1
Click the Start button, select Settings, and then click
Printers.
2
Double-click the Panasonic KX-P8420 printer icon, and
select Properties from the Printer menu.
In the Ports tab, confirm that LPT1 (Local Port) is checked. The
KX-P8420 is ready to accept parallel print jobs from your computer.
3
Select the General tab, and click Print Test Page.
When you select Print, your files are sent over the parallel port
connection to the KX-P8420.
4
Select the Sharing tab if you want to share the printer
with network users. Click Shared, and enter a share
name.
Select the operating system or systems used by your network
clients from the Alternate Drivers box if you want to install a printer
driver that those clients can automatically download when they
connect.
5
Click OK. In the dialog box that appears, navigate to the
location of the alternate printer driver to install.
6
Click OK to exit the Printer Properties dialog box.
Installing Software for Windows
85
Advertisement
Table of Contents
