Table of Contents
Advertisement
Care and Maintenance
160
7
Remove the oil supply roll.
a) Press out on tabs to unlock the oil supply roll.
b) Remove the oil supply roll out of the fuser.
a
a
NOTE:
•
If the paper is not jammed in the fuser unit, perform the following.
1. Repeat steps 1 to 4 of the procedure on
2. Skip the steps 8 to 10 and go to step 11.
8
Remove the cleaning pad, holding the tabs.
b
page
156-157.
Cleaning pad
The shape of a
cleaning pad is
subject to change.
Advertisement
Table of Contents
