Table of Contents
Advertisement
Care and Maintenance
168
Trouble
Half tone area has
areas of weak color.
A single color appears
faded.
A single color has a
sharp, dark or light
vertical streak.
Small white spots
appear on OHP
transparency.
Possible Cause
Paper doesn't match
the environmental
conditions, or it has
too much moisture.
The color density is
set incorrectly in the
printer panel.
The toner is almost
depleted.
The toner cartridge is
almost depleted and
is not properly
applying toner.
OHP transparency
has dust on its
surface.
Corrective Action
Try fresh paper, or
another type of paper.
Store media in the
original, dust-free
package in the same
environmental
conditions as the
printer.
See
"Chapter 7
Color
Calibration".
Replace the color
toner cartridge soon
(depending on the
complexity of your
prints, you can
continue to print up to
100 more pages).
Replace the color
toner cartridge.
Remove dust or stain
from OHP
transparency.
Advertisement
Table of Contents
