Panasonic KX-P8420 Operating Instructions Manual page 119

Color laser printer
Hide thumbs Also See for KX-P8420:
Table of Contents

Advertisement

Setup from the Front Panel and WebSetup
Subnet Mask— If you need to set the subnet mask, enter one of the
following values:
255.0.0.0 if the IP address starts with a number less than 128
255.255.0.0 if the IP address starts with a number from 128 through 191
255.255.255.0 if the IP address starts with a number greater than 191
Be sure to confirm the subnet mask setting with your network administrator
before proceeding. In some cases the required setting may be different from
those listed.
Enable on Token Ring—Enable this option if you have a TCP/IP network
connected to the KX-P8420 over Token Ring. If you use Token Ring,
enabling TCP/IP for Token Ring is required for enabling the Fiery WebTools.
IP Address—Enter the KX-P8420 IP address for Token Ring. The
KX-P8420 is shipped with the IP address set to the loopback address,
(127.0.0.1) which is an internal address used for network checking. If you
plan to print with TCP/IP, you must first assign the KX-P8420 a unique
network IP address. For information about setting up printing with TCP/IP,
see "Setting up TCP/IP printing" on
Subnet Mask—If you need to set the subnet mask, enter one of the
following values:
255.0.0.0 if the IP address starts with a number less than 128
255.255.0.0 if the IP address starts with a number from 128 through 191
255.255.255.0 if the IP address starts with a number greater than 191
Be sure to confirm the subnet mask setting with your network administrator
before proceeding. In some cases the required setting may be different from
those listed.
Gateway—If your TCP/IP network has a gateway, and users outside the
gateway plan to print to the KX-P8420 using TCP/IP, enter the gateway
address here. By default, the loopback address, 127.0.0.1, is set. Obtain the
correct gateway address from your network administrator.
Enable AppleTalk—Enable this option if you have an AppleTalk network
connected to the KX-P8420. This setting enables the KX-P8420 to
communicate over AppleTalk networks.
page
53.
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

8420oi

Table of Contents