Table of Contents
Advertisement
To load labels in the multi-purpose tray:
For detailed information on labels, see "Transparencies and labels" on
page
209.
1
Set the media thickness switch
2
Adjust the media guides to the width of the label sheets.
3
Insert label sheets in the multi-purpose tray with the
printing side up and insert the top of the sheets first.
The height of labels should not exceed the limit mark on the guide.
4
Choose MPT Label as the paper source in the Paper
tab of the printer driver.
NOTE:
•
Avoid printing labels if the temperature is too high; doing so may damage
consumables.
Printer Setup
(page
39).
43
Advertisement
Table of Contents
