Stiga MP2 500-R Li D48 Series Operator's Manual page 114

WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
EN
BEFORE USING THE MACHINE. Keep for future reference.
INDEX
1. GENERAL INFORMATION ............................................ 1
1.1 How to read the manual ....................................... 1
1.2 References ........................................................... 1
2. SAFETY REGULATIONS .............................................. 1
2.1 Training ................................................................ 1
2.2 Preliminary procedures ........................................ 2
2.3 During operation................................................... 2
2.4 Maintenance, storage........................................... 3
2.5 Battery / battery charger ....................................... 3
2.6 Environmental protection ..................................... 3
3. GETTING TO KNOW THE MACHINE ............................ 3
3.1 Description of the machine and planned use ....... 3
3.2 Safety signs.......................................................... 4
3.3 Identification label ................................................ 4
3.4 Main components................................................. 4
4. ASSEMBLY.................................................................... 5
4.1 Assembly components ......................................... 5
4.2 Grass catcher assembly ....................................... 5
4.3 Handle assembly ................................................. 5
5. CONTROLS .................................................................. 5
5.1 Safety key (Deactivation device) .......................... 5
5.2 Operator presence lever ....................................... 5
5.3 Power button ........................................................ 5
5.4 Drive engagement lever ....................................... 6
5.5 "ECO" button ........................................................ 6
5.6 Cutting height adjustment .................................... 6
6. USING THE MACHINE .................................................. 6
6.1 Preliminary procedures ........................................ 6
6.2 Safety checks ....................................................... 7
6.3 Start-up ................................................................ 7
6.4 Operation ............................................................. 7
6.5 Stop 8
6.6 After operation ..................................................... 8
7. ROUTINE MAINTENANCE ........................................... 8
7.1 General information .............................................. 8
7.2 Battery ................................................................. 8
7.3 Cleaning ............................................................... 9
7.4 Nuts and bolts ...................................................... 9
8. OCCASIONAL MAINTENANCE .................................... 9
8.1 Cutting means ...................................................... 9
9. STORAGE ................................................................... 10
9.1 Storing the machine ........................................... 10
9.2 Storing the battery .............................................. 10
10. HANDLING AND TRANSPORTATION ........................ 10
11. ASSISTANCE AND REPAIRS ...................................... 10
12. WARRANTY COVERAGE ........................................... 10
13. Maintenance table .............................................. 11
14. Problem identification ......................................... 12
15. OPTIONAL ATTACHMENTS ....................................... 13
15.1 Batteries ............................................................. 13
15.2 Battery charger .................................................. 13
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain important information
regarding safety and operation and are emphasized in this
manner:
NOTE OR IMPORTANT
information on what has already been said, and aim to
prevent damage to the machine.
The symbol highlights danger. Failure to observe the
warning can lead to the risk of injury to oneself and others
and/or damage.
The paragraphs highlighted in a square with
grey spots indicate the optional characteristics
not on all models documented in this manual.
Check if the characteristic is on this model.
Whenever reference is made to a position on the machine
"front", "back", "left" or "right" hand side, this refers to the
operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for use are numbered 1, 2,
3, etc.
The components indicated in the figures are identified with
letters A, B, C, and so on.
Reference to component C in figure 2 is indicated with the
wording: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The actual pieces can
differ from those illustrated in this document.
1.2.2 Titles
The manual is divided into chapters and paragraphs. The
title of paragraph "2.1 Training" is a subtitle of "2. Safety
regulations".
References to titles or paragraphs are marked with the
abbreviation chap. or par. and the relevant number. Example:
"chap. 2" or "par. 2.1"
2. SAFETY REGULATIONS
2.1 TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop the motor
quickly. Failure to follow the warnings and instructions
may result in fire and/or serious injury.
EN - 1
these give details or further