Advertisement
1. OVERVIEW
This User's Manual explains the specifications and part identification of A6TE2-16SRN
Relay Terminal Module (abbreviated as A6TE2-16SRN hereafter).
The A6TE2-16SRN is used in place of a joint terminal block and in-panel relay. It
reduces wiring work processes for the programmable controller, joint terminal block and
in-panel relay.
1) The A6TE2-16SRN can be used in combination with sink type output modules
having the following connectors (only Fujitsu component Limited 40-pin
connector).
Classification
L series
Q series
AnS series
A series
CC-Link
MELSECNET-MINI AJ35TC1-32T
2) One cable (separate arrangement; see Figure 4.2) and two relay terminal
modules can share 32 points (one connector).
3) By using the dedicated cable, it is possible to install the relay terminal module in a
position of maximum 10 m (32.8 feet).
4) There are five types of dedicated cables, each having different cable length.
5) Because it is a socket-type relay, each relay can be replaced individually as
necessary.
The relay has a structure that allows secure installation and prevents drop-offs
due to vibration, etc.
It is supplied with a relay removal tool.
A6TE2-16SRN
LY41NT1P, LY42NT1P
QY41H, QY41P, QY42P, QH42P
A1SY41, A1SY41P, A1SY42, A1SY42P, A1SH42,
A1SH42P, A1SH42-S1, A1SH42P-S1
AY42, AY42-S1, AY42-S2, AY42-S3, AY42-S4, AH42
AJ65SBTCF1-32T, AJ65BTC1-32T
Applicable Models
Advertisement
