Advertisement
2) Removal from a DIN Rail
a) Pull down the hook at the bottom of the module with a flat blade screwdriver.
b) Pull the module forward while the hook is pulled down, then remove the module
from the DIN rail.
6. Precautionary Items for Relay Replacement
When the A6TE2-16SRN relay is replaced, always use a relay that is
compatible with the A6TE2-16SRN.
The following table shows the relationship between the relay terminal module
types and applicable relays for replacement.
Relay terminal
module
A6TE2-16SRN
A6TE2-16SR *1
*1:Conventional relay terminal module
Direction of module installation
Figure 5.3 Installation Procedure to a DIN Rail
Direction of module removal
Figure 5.4 Removal Procedure from a DIN Rail
Relay for replacement ( : usable, ×: unusable)
New type
replacement
relay
RV3T-3G24
×
Module
Module
New type
replacement relay
(with an adapter)
RV3T-3G24MA
×
DIN rail
DIN rail
Driver
Existing
replacement
relay
RV3S-3B24S
×
Advertisement
