Advertisement
e) Horizontal orientation: Correct
Point
Confirm that the relay is securely installed before turning on the power supply for the
first time after shipment.
5.2 Replacing the Relay
The relay is replaced in the following manner.
1) Open the top cover of the module.
2) Pull out the red relay removal tool at the left end.
3) Insert the relay removal tool from top of the relay and pull out the relay.
4) Mount a new relay from the upper direction, taking note of the relay installation
direction.
5) After confirming that the relay is firmly connected and there is no bent in its lead,
turn on the power supply.
5.3 Installation and Removal to/from a DIN Rail
1) Installation to a DIN Rail
a) Insert the top of the DIN rail to the upper side of the groove for the DIN rail.
b) Fix the module to the DIN rail by pressing against the rail.
Figure 5.1 Installation Orientation (Horizontal view)
Relay removal direction
Figure 5.2 Relay Removal Procedure
f) Horizontal orientation: Incorrect
Relay removal tool
Relay
Advertisement
