Product Type; Identification; 2.3.1 Hardware Identification - Magtek DynaFlex II PED Manual

2 - General Description
2.2

Product Type

DynaFlex II PED products include USB communications, magnetic stripe readers (MSR), contact chip
card readers (ICCR), and a contactless card reader (CTLS), a color display and touchscreen with PIN and
manual account data entry as well as signature capture capabilities. DynaFlex II may also be purchased
with an embedded barcode reader (BCR) or wireless WLAN communications module.
DynaFlex II PED can be used as desktop or handheld devices. The Kiosk version uses a back cover
intended for secure mounting, suitable for use in an unattended environment. All are approved as a PIN
Entry Device (PED) device class under PCI PTS POI v6.2 requirements.
Usage in any other environment will invalidate the approval.
2.3

Identification

2.3.1 Hardware Identification

To find important product identification, look on the printed product label on the bottom face of the
device as shown in Figure 2-3 below. The device may need to be temporarily detached from stands or
surfaces to view the label.
The printed label includes the following elements of device identification information, shown by the
numbered callouts below in Figure 2-4:
1) Product name
2) PCI Hardware Identifier ("HW")
DynaFlex II PED| PIN Entry Device | PCI PTS POI v6.2 Security Policy
Do not remove or alter this label.
Figure 2-3 - DynaFlex II Device Label Location
Page 8 of 24 (D998200520-15)