Download Print this page

Communications And Security Protocols; Configuration Settings - Magtek DynaFlex II PED Manual

Pin entry device, pci pts poi v6.2 security policy

Hide thumbs Also See for DynaFlex II PED:

Table of Contents

3 - Installation and User Guidance

Table 3-1 - Sensor Values

Sensor

Internal Voltage

Temperature

3.4

Communications and Security Protocols

DynaFlex II PED supports a USB interface using the USB-HID protocol and optionally 802.11 WLAN

using TLS 1.2 secure WebSocket. Transactions, configuration, firmware updates, and key injection can

all be performed using these interfaces. Use of any method not listed in this security policy will invalidate

the device's PCI PTS approval.

3.5

DynaFlex II PED ships from the factory fully secure. The devices have no configuration settings that

require modification by the user to meet PCI security requirements.

DynaFlex II PED| PIN Entry Device | PCI PTS POI v6.2 Security Policy

Low Threshold Value

1.60V ± 0.055V

-45°C ± 15°C

Page 16 of 24 (D998200520-15)

High Threshold Value

3.775V ± 0.1V

120°C ± 10°C

Table of Contents

Do you have a question about the DynaFlex II PED and is the answer not in the manual?