4-5 PC-HEALTH install Winbond Hardware Doctor Utility
1. Click PC-HEALTH when MAGIC INSTALL
MENU appears
3. Click FINISH and restart your computer
5.
This is a CPU/System Fan Speed and
Temperature status information
2. Click Next when Install shield wizard Window
appears, Choose destination location and click
Next, select program folder and click next
4. After executing Winbond Hardware Doctor it
supports system voltage, Fan speed and
CPU/SYSTEM Temperature. Because this is a
On-time Monitoring program therefore the
value will change after it detected, if the value
is over default setting the system will have
warning picture and beeps. This is a System
Voltage status
50