Filling The Sacs - Gaumard S230.7 User Manual

FILLING THE SACS.

1. Place the Male Catheterization Simulator in
the location where it will be demonstrated
2. Fill the external bladder tank with water and
position it on the stand next to the simulator,
ensure the clamp is tightened.
3. Insert the hose from the external bladder
tank to the simulator's abdominal port.
4. To fill the internal bladder tank, raise the
external bladder tank above the simulator and
open the clamp.
5. When the water transfer
completed, put the auxiliary tank back on the
stand, apply the clamp and disconnect it from
the simulator.
6. Use the stopper to plug the open port on
the abdomen.
has been
| Equipment Set Up | User Guide | 9