Table of Contents
Advertisement
IP-PTZ650W
Setup Options
5.1 PoE ZIP NVR
When connecting to a ZIP PoE NVR plug the camera directly into the NVR's built in
PoE switch.
The camera should automatically become visible after being connected for
approximately 1 minute.
EPoE (Extended PoE)
The 100m distance for a camera can be increased when the PoE Mode is set to
EPoE. In the menu on a ZIP PoE NVR go to:-
Video > IP Channels > PoE Mode
5.2 Non-PoE ZIP NVR
When connecting cameras to a Non-PoE NVR, they are first connected to an
external network switch which is in-turn connected to the NVR as shown below.
See
Extra Resources
for more information on Adding IP Cameras manually to
13
a ZIP Recorder.
11/04/2023
ZipDVR.com
4
Advertisement
Table of Contents
