Table of Contents
Advertisement
IP-PTZ650W
2. Enter the menu on the recorder, select AI > Setup > PD & VD.
3. Select the Enable "tick" option to turn the person detection on for the PTZ camera
channel, then select Apply.
4. Select the Setup "Cog" option to edit the detection settings.
5. See the below recommended settings as default for auto tracking with the IP-
PTZ650W;
Snap Mode
Min Pixel
Max Pixel
Sensitivity
Detection Type
Detection Mode
10
Default - This will trigger when the subject first enters the
field of view.
64 - Set to the suitable smallest size a person would be in
the field of view.
1080
80 - Recommended to increase the sensitivity to 80
Pedestrian - Auto tracking performs best when used
soles with Pedestrians, as stationary vehicles can cause
false triggers.
Motion Mode - Will only detect moving subjects.
ZipDVR.com
11/04/2023
Advertisement
Table of Contents
