Bissell REVOLUTION HYDROSTEAM 3423 Series Manual page 10

After-Cleaning Care (continued)
Using the Rinse and Storage Tray (select models)
A
B
1. There are 2 hooks on each
side of part A that hook under
part B. Press B down onto
A. The water cup (C) can be
stored on the side of the tray.
30s
4. With hose tool door open,
recline machine and press
power button to turn ON. Run
for 6-8 seconds to rinse brush
rolls.
Storing Your Machine
Once your cleaning is complete, make sure both the dirty and clean water tanks are emptied, rinsed
out, and dried before the next use. Wrap cord around cord wrap for storage. Store machine in a
protected, dry area.
10 BISSELL.com
C
2. Place machine on tray and
open hose door on foot.
5. Close hose tool door. Press
power button to turn ON and
run until all water is picked up.
Repeat steps 3-4 until foam is
completely rinsed. Press power
button to turn machine OFF.
3. Fill rinse cup with fresh tap
to the fill line printed on cup.
Pour water into tray as shown.
30s