FEATHERWEIGHT™ CORDLESS
2-IN-1 LIGHTWEIGHT VACUUM
3061 SERIES
Troubleshooting ............................................................... 7
Warranty ............................................................................... 7
Product Overview
1. Power Button
2. Brush Roll ON/OFF Button
3. 2-Way Folding Handle
Release Trigger
4. Hand Vacuum Release Button
5. Hand Vacuum Power Button
6. Dirt Tank Release Button
7. Charging Light Indicator
8. Dirt Tank
9. Swivel Head
Go online for a comprehensive walkthrough
of your new purchase!
This guide has everything you need to get ready for first use,
including setting up, using and maintaining your machine,
but online you'll find additional resources like tips and
troubleshooting, videos, product registration, parts, and more.
Go to support.BISSELL.com.
1
3
2
4
5
7
6
8
9
Need help?
Do you have a question about the FEATHERWEIGHT CORDLESS 3061 Series and is the answer not in the manual?
Questions and answers
Is it O.K. to leave the charger plugged into the unit when it is not in use?
The manual does not state whether it is safe or unsafe to leave the charger plugged into the Bissell Featherweight Cordless 3061 Series when not in use. Therefore, this information cannot be determined from the provided context.
This answer is automatically generated
Where is. The battery located
The exact location of the battery on the Bissell Featherweight Cordless 3061 Series is not specified in the provided context.
This answer is automatically generated
When I charge the entire vacuum, only the handheld section takes a charge. How do I charge it so I can use the standup vacuum? Thanks!
Use only the charger specified for the Bissell Featherweight Cordless 3061 Series vacuum, which is the E-TEK Model ZD12D140080US. Ensure the temperature is between 40-104°F while charging. Properly connect the charger to the vacuum and confirm that the charging light indicator turns on.
This answer is automatically generated
My cordless is not charging. It’s only 2 months old.
Your Bissell Featherweight Cordless 3061 Series may not be charging due to the following reasons:
1. Charger, Battery, or Motor Error – If the battery status light blinks red and green, there may be an issue with the charger, battery, or motor. Contact Consumer Care for assistance.
2. Incorrect Charger Usage – Ensure you are using the charger supplied by the manufacturer. Using a different charger may prevent proper charging.
3. Charging Temperature Issues – The vacuum should be charged within the specified temperature range. Charging outside this range may damage the battery.
4. Battery Damage – If the vacuum was exposed to fire or excessive heat (above 130°C/265°F), the battery could be damaged and may no longer charge.
5. Charging Port or Adapter Issues – Check if the charging adapter is securely plugged into both the vacuum and the wall outlet.
6. Blocked Openings – Ensure that dust, lint, or debris is not blocking airflow or affecting the charging process.
Try troubleshooting these issues. If the problem persists, contact Consumer Care.
This answer is automatically generated
How to change battery on 3061 featherweight cordless
@Jan’s Johnson
do I charge my 3061 series featherweight cordless stick every time I use it?