Log-Window
The so-called log window is always visible. All M-Bus communication steps are logged in this
window. Data is displayed in hexadecimal notation. It is possible to mark outputs in the log
window and copy them with the keys "CTL-C" to the windows clipboard. Then the data can be
easily imported to any text editor for documentation. As soon as the max. storage capacity of
the window is achieved, no more data is logged. If you want to log further, you must delete the
logged data.
The following buttons are also always visible:
clears all outputs inside the log window.
Erase log
terminates the program and stores the current setting of serial port
Exit
(port no.) into the INI file.
User Manual AnDi1 / AnDi2 / AnDi3 / AnDi4 ·10/2017 · VERSION 1.3
AnDi1/2/3/4
10