3.3 Sheets AnDi4 Port1..4
These sheet shows the actual settings and values of the respective input channel of the AnDi 4
(in this example: Port 3). The following input boxes and buttons are used to change the
parameters of the A/D converter:
Prim. address
is the M-Bus address of the selected port. Values between 1 and
250 can be entered in this field for new assignment of the address.
After pressing the "Write" button the software programs this primary
address and further variable settings on this sheet into the M-Bus
device.
ID (sec. adr.)
is the 8 digit M-Bus ID (identification no.), which is also used for
secondary addressing of this port.
describes the measured medium of the connected meter.
Medium
Examples: Oil, Water, Heat, Electricity
User Manual AnDi1 / AnDi2 / AnDi3 / AnDi4 ·10/2017 · VERSION 1.3
AnDi1/2/3/4
11