Changing the GPRS
connection code
If the mobile phone service provider requires
setting for the GPRS connection to be
changed, you can do it in the ADV. OPTIONS
menu.
?
To change the GPRS connection code
manually:
Move to the GPRS CODE menu and
ß
press SRC/OK or
/MENU.
GPRS will appear on the display with a
list of digits (1, 2, 3, 4, 5, 6, 7, 8, 9),
DEFAULT and DISABLE. To select a new
code for the GPRS connection, press N
or O until the desired option appears,
ß
then press SRC/OK or
To choose to keep the default value, se-
lect DEFAULT To disable the connection
code, select DISABLE
After having reset the GPRS connection
code, Blue&Me™ will display the mes-
sage GPRS CODE SET.
}
To set the GPRS connection code using
voice interaction:
'
Press
and say "Settings" and then
"Connection code".
Blue&Me™ will reply with the current
GPRS connection code and the current
value. To change it, say a number from
1 to 9 or say "Default". To disable it,
say 'Disable'. To change the code, say
a number from 1 to 9 or say 'Default'.
To disable the code, say "Disable". (In
the previous sentence, the current val-
ue referred to is the value set by the
GPRS connection code, at the time when
it was used).
/MENU.
After having set the new connection
code, Blue&Me™ will reply with "The
connection code is at the new value" (In
the previous sentence the new value re-
ferred to is the value set for the GPRS
connection).
EXITING FROM THE SETTINGS
MENU
At the end of each operation, you can exit
from the settings menu as follows.
?
To manually exit from the SETTINGS
menu:
Select the option EXIT and then press
ß
SRC/OK or
/MENU.
}
Or, with voice interaction:
'
Press
and say "Exit".
45